Park Tool 758.2 – Cutter And Reamer, 1.5 Inch Headsets For HTR1 & HTR1B

• The Park Tool 758.2 will ream and face the head tubes of bikes that use the One Point Five Interface Standard.
• The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer
• Must also be used with the 750 Centring Cone Adaptor to ensure correct alignment
• 1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facer
• Bores a machined surface to a depth of approximately 25mm and then faces the end of the headtube
• SHIS terminology: The 758.2 is for EC49 upper and lower headtubes
• Use with generous quantities of Park CF2 cutting fluid for best results and prolonged tool life

Occasionally, without notice, manufacturers change product design and/or specifications.